Dante DLC1981, Инструкция по установке и эксплуатации, Страница: 25 / 53

-24
-
ME NU OPE R ATI ON
■ ■ ■ ■
SELECTING ITEM
In the main menu, the cursor flashes on the left side.
Move the joystick up or down to point to the desired
item. And then, move the joystick right to select the
item.
Select an item to enter its sub menu or run a specific
function or change its value or edit its title.
■
■ ■
■
CHANGING VALUE
Move the joystick up or down to change the value,
move the joystick left to save the setting and exit. In
the case of multiple digits value, move left or right to
select digits, move up or down to change value,
move left to save the setting and exit.
Note: To increase the value changing speed, hold the
joystick up or down for more than 10 seconds.
For example: In order to change BLC LEVEL,
please follow these steps.
1.
Call preset 95 or call preset 1 twice within 5
seconds to access the Main Menu.
2. Move the joystick down to point the cursor to
<Camera >, move the joystick right to select it.
Select BLC MODE in the same way.
NOTE: Here-in-after menu paths are written in the
following format:
<Main Menu> <Camera > <BLC Mode>
<BLC Level>
3. The <BLC Level> option blinks. Move the joystick
up or down to change the option, move the
joystick left to save the changing.
When finished, select <Back> to return to upper
menu.
■ ■ ■ ■
EDITING TITLE
Move the cursor to <Title> and then move joystick
right to enter <Title>. In the editing area, move
joystick left or right to your desired editing digits
and move the cursor up or down to select desired
letter
When finished the selection, turn joystick left to save
the settings. Finally, select <Back> to return to
upper menu.
System Info
Lens
Camera
Pan/Tilt
Auto Running
Privacy Mask
Alarm
Exit
BLC Level: off
WDR Level:off
Back
Frame Limit: Off
Shutter: Off
Exposure: Off
Preset Freeze: Off
AWB Mode: Auto
BLC Mode
Back
Zone No. : 001
Title: xxxx xxxxxxxxxxxxxxx
Set Left Limit
Set Right Limit
Delete
Default Speed : 001
Run
Back