DMR-6 Mid-Rise Scissor Lift
24
P/N 5900253 — Rev. A — August 2020
Raising a Vehicle
This section describes how to raise a Vehicle on the Lift.
To raise a Vehicle
:
1.
If you find any issues, resolve them
before
raising the Vehicle;
only use the Lift if it can be
used safely
.
2.
Make sure the Lift is fully lowered and the Lift Arms are out of the way.
3.
Drive the Vehicle over the Lift and then stop.
4.
Put the Vehicle in park, put on the parking brake, and turn off the Vehicle.
If the Vehicle is a manual transmission, put it into first gear before turning it off; you do not want the
Vehicle moving while it is raised.
5.
Walk around the Vehicle and make sure there are no obstructions or any other issues that will
interfere with the raising the Lift.
6.
Position the Lifting Arms on the manufacturer’s recommended Lifting Points of the Vehicle you are
raising.
If you are unsure where the Lifting Points are, consult
Vehicle Lifting Points for Frame Engaging
Lifts
, which is available on the ALI website (www.autolift.org/ali-store), or provided by the
manufacturer of the Vehicle.
7.
Put the Lift Pads under the Vehicle so that they are
directly under
the Lifting Points for the
Vehicle you are raising.
If necessary, use the included Lift Pad Extensions for extra height.
8.
On the front of the Power Unit, press and hold the
Up
Button to raise the Lift until
just before
the
Lifting Arms make contact with the Lifting Points.
9.
Check to make sure the Lifting Arms will make solid contact with the Lifting Points when raised
further.
Adjust them if necessary.
10.
Raise the Lift until the tires of the Vehicle are a few inches off the ground.
If the Lift becomes unstable or the Vehicle starts moving, release the
Up
Button immediately.
11.
Check to make sure the Lift Arms are making solid contact with the Lifting Points.
If any of the Lift Pads are not making solid contact with the Lifting Points, lower the Lift and adjust
the Lift Pads so that they make better contact.
12.
Rock the Vehicle to make sure the Vehicle is stable and balanced.
If the Vehicle is
not
stable and balanced, lower the Lift back to the ground and start over.
If the Vehicle
is
stable and balanced, it is safe to raise further.
⚠
DANGER
Do
not
raise the Lift further until you are certain the Vehicle on the Lift is both stable
and balanced. If the Vehicle is
not
stable and balanced, it could fall, which could
damage the Vehicle, damage the Lift, or injure or kill anyone under the Vehicle.
13.
On the Power Unit, press and hold the
Up
button.
14.
When the Lift just passes the desired height, release the
Up
button.
Содержание DMR-6
