Dannmar DMR-6, Инструкция по установке и эксплуатации

Страница: 23 / 36

DMR-6 Mid-Rise Scissor Lift
23
P/N 5900253 — Rev. A — August 2020
About Safety Locks
Your Lift comes with three Safety Lock positions; they serve two important functions:
•
Safety
. Safety Locks hold the Platform in place. Once the Lift is engaged on the desired Safety
Lock, the weight of the Vehicle holds the Platform in place.
⚠
WARNING Always leave your Lift engaged on a Safety Lock or fully lowered. Although rare, it is
possible for Hydraulic Fluid in the Hydraulic Cylinders to leak, causing the Platform
to slowly come down if it is
not
engaged on a Safety Lock.
• Adjustable height . Having multiple Safety Locks means you can raise the Vehicle to just the
right height for the work you are performing.
To put your Lift on a Safety Lock :
1. Press the Up button on the Power Unit to raise the Platform.
The Release Cam has not passed over the Lock Block; the Lift would
not
go on a Safety Lock at
this point.
2. To use that Safety Lock, keep pressing
Up
for another half a second, then release
Up
.
3. Press and hold the Lowering Handle for a few seconds; the Release Cam moves into a locked
position on the Lock Block it just passed.
If you miss the desired Safety Lock, there’s no problem; just try it again until you get it right.