Installation
Diagram 1a
Danley DSA amplifier dimensions.
(Shaded area defines ventilation space.)
440 mm
17.3 in
332 mm
13.1 in
4. Installation
4.1 Amplifier Location
Danley DSA
amplifiers are shipped with rack “ears” attached
and are primarily intended for standard (19 inch) equipment
rack installation. If not to be installed in an equipment rack,
Danley DSA amplifiers can be placed free-standing on a flat
surface. Adhesive rubber feet are supplied for this purpose.
It is important that any installation provides space for airflow
through the ventilation apertures at the front and rear of the
amplifier. This is illustrated in Diagram 1a.
88 mm
3.5 in
