Introduction and Overview
2.1 Connections and Power Switching
Danley DSA signal input and output connections are
accomplished via RCA Phono and Euroblock style connectors.
A GPIO (General Purpose In/Out) Euroblock connector enables
some amplifier functions to be controlled externally, and
wireless or RJ45 socket Ethernet network connection options
are also provided. Cable connectors and connections are
described and illustrated in
Section 6
of this manual
Danley DSA amplifiers incorporate a front panel mounted
power button. Press the button once to switch the amplifier
on or off. Amplifier power management behaviour can be
configured via the Control web app
Settings Menu
described in
Section 5
of this manual.
2.2 Network Features
Danley DSA amplifiers are TCP/IP network connected devices
that require a wired or wireless network connection to access
their configuration menus. The configuration menus are
accessed via the Control Web App interface and cover Input,
Zone, Output and General Settings functions. The Control web
app configuration menus are described in
Section 5
of this
manual.
2.3 Firmware
This manual describes the features, functions and user
interface of Danley DSA amplifiers running
Firmware Version
1.2.0.
It is strongly recommended that the firmware version
installed in the amplifier in use is checked initially, and
regularly thereafter. If updated firmware is available,
the amplifier should be updated as a priority.
The firmware installed in the amplifier can be identified
and updated by selecting the
Device
option in the Control
web app
Settings Menu
. Firmware versions can be checked,
and firmware downloaded, from the website: https://www.
danleysoundlabs.com
3. Carton Contents
Danley DSA
amplifiers are shipped in a cardboard carton
containing the amplifier unit, a mains cable appropriate for the
sales territory, an accessory pack, and a document pack. The full
contents is listed below.
• Amplifier unit
• Rack mount ears (fitted)
• Mains power cable
• Input connector x 2
• GPIO socket connector
• Output connector x 1 or 2
• Adhesive rubber feet x 4
• Document pack
