Installation
Diagram 4a
Danley DSA
with desk/wall Mounting Plate and adhesive feet.
2 positions and 4 positions.
Diagram 4b
Danley DSA
wall and under-desk mount.
4.2 Free-standing
If not installed in an equipment rack, Danley DSA amplifiers can
be placed free-standing on a flat surface. Adhesive rubber feet
are supplied for this purpose.
Danley DSA
amplifiers can also be attached to the
underside of desks or wall mounted using connecting
plate hardware. The adhesive rubber feet should
also be used in these circumstances to minimise
the possibility of vibration between the amplifier
and mounting surface. Wall and desk mounting is
illustrated in
Diagrams 4a and 4b
.
It is important in any free standing installation that
airflow through the amplifier’s side panel mounted
fans and rear panel ventilation apertures is not
compromised by adjacent items. At least 80mm of
free space behind the amplifier and 25mm along at
least one side should be retained at all times.
Mounting Plate +
2 x M3 x 6 countersunk
Adhesive Foot
4 positions
