Danley DNA SC48, Руководство пользователя

Страница: 15 / 44

15
Using unbalanced connections
Please note that the use of unbalanced connections is not recommended, however, when
connecting the device to an unbalanced audio source, the signal conductor should be connected to
XLR pin 2
. The ‘Cold’ conductor
or cable screen should be connected to XLR pin 3 with a short
connection made between pin 1 and pin 3.
2 1
3
HOT +
Shield
Input XLR unbalanced connection
An unbalanced input may be driven by connecting pin-
3 ‘cold’ signal to the ground connection of the
unbalanced destination input. The cable shield is connected to pin 1 at the source (this device), and
to ground at the destination device (along with
the pin 3 ‘cold’ connection).
Alternatively, if the
cable is a single core plus shield, the cable shield should be terminated to both pins 1 and 3.
1 2
3
Shield
HOT +
Output XLR unbalanced connection