5
Priority Channel 9 / 19
8.
- It the contains the priority channels 9 and 19. Priority channel 9
is selected by pressing the key (7) [ CH9/19 ] once. To set priority
channel 19, press the key (7) [ CH9/19 ] twice.
Transmitting
9.
To transmit, press and hold the key(A) [ PTT ] at the microphone
and the TX icon will appear on the LCD.
For best quality, please speak normally at a distance of 2 - 4
inches. Speaking too loudly will cause distortions and make the
signal difficult to understand.
On completion of the transmission release the PTT key and the
radio will revert to receiving mode.
External speaker jack
10.
The radio is equipped with a 3.5 mm jack socket (D) at the rear
panel to connect an external.speaker of 4 - 8 Ohm impedance.
At 4 Ohm the speaker load can be 4 watts. When the external
speaker is connected, the internal speaker will be switched off.
this channel by pressing PTT key. If there is no transmission or
detected signal on that channel within 5 seconds, radio will start
scanning again. To exit the SCAN function, press the SC Key or the
PTT key.
6
