Dangerous power FUSION FX, Руководство пользователя

Страница: 18 / 38

W W W . D A N G E R O U S P O W E R . C O M
32 33
glObAl setup Menu
(COntinueD)
- Ramp Mode
Determines which firing mode to ramp to: Burst, Reactive, Full Auto,
or Percent ramping.
- Ramp Value
In Burst Mode, it is the number of shots in a burst. In Reactive
Mode, it is the number of shots fired with each trigger pull and
release. In Percent ramping, it is the percentage of ramping used
(Percentage = Ramp Firing Value x 100).
- Ramp Timer
Determines the amount of time the trigger can be at rest and still
remain in the current ramping stage before reverting back to Semi
Mode. This time value is entered in seconds. If this setpoint is
zero, it will reset ramping when the trigger is released, or when your
trigger pull rate drops below the Ramp Pull Rate setpoint.
Reset Menu
The Reset Menu allows you to individually reset profiles, statistics, or
your entire marker to factory default settings. Trigger scroll to the item
you want to reset. To select the item you wish to reset, pull and hold the
trigger. A confirmation screen will then ask you to confirm that you want
to reset the item. Pull and hold to confirm.
Start Menu > Program Menu > Reset Menu
MARkeR setpOints
- Trigger Debounce
This value sets amount of time (in milliseconds) the trigger must
remain inactive prior to accepting a new trigger pull. Lowering this
value can cause your marker to fire erratically when making
successive trigger pulls. Raising this value will prevent erratic firing
and provide reliable firing in sync with your trigger pulls.
- Solenoid Dwell
This setting allows you to adjust how long the solenoid is energized
(in milliseconds). Higher Dwell times will consume more power and
air when the solenoid is energized. Lower Dwell times consume
less power when the solenoid is energized. Lowering this value too
much may prevent the solenoid valve from opening altogether.
- Anti Bolt Stick Dwell
This setting allows you to add additional Dwell time (in milliseconds)
to your solenoid Dwell setting. This will only affect the first shot fired
after the Bolt Stick Reset Time is exceeded.
Start Menu > Program Menu > Set Profile (x) > Marker Setpoints
NOTE
YOU SHOULD ONLY USE THIS SETTING IF YOU
EXPERIENCE FIRST SHOT DROP OFF.