Dangerous power FUSION FX, Руководство пользователя

Страница: 30 / 38

W W W . D A N G E R O U S P O W E R . C O M
56 57
sOlenOiD MAintenAnCe
(COntinueD)
6. Remove solenoid spring. (SEE PIC E)
7. With thin tweezers or needle nose pliers, carefully
remove the solenoid piston by gently securing the tip and
pulling it out. (SEE PIC F)
8. Carefully inspect and clean solenoid piston o-rings. Make
sure the o-rings are not cracked, broken, or show signs of
wear. Replace parts if necessary.
9. With a cotton swab, lightly apply a small amount of DP-40
lube to the solenoid piston assembly. (SEE PIC G)
10. Replace in reverse order.
WARNING
NEVER USE FORCE WHEN REMOVING OR
REINSTALLING THE SOLENOID AND ITS
SENSITIVE INTERNALS. BE CAREFUL NOT TO
BEND, TWIST, OR BREAK DELICATE WIRES, AS
DOING SO MAY RENDER THE UNIT
INOPERATIVE OR CAUSE IT TO MALFUNCTION.
ReMOving sWitChblADe™ tRiggeR FROM
FRAMe
1. Locate the two trigger adjustment screws. Use (5/64”)
allen key wrench to loosen and remove both screws by
turning them counterclockwise. Be careful not to misplace
the screws. (SEE PIC A . B)
2. Locate trigger removal screw. Use (3/32”) allen key
wrench to loosen and remove screw by turning it
counterclockwise. Carefully pull out screw. Note that the
latter part of the screw is a bolt, which the trigger hinges
upon. (SEE PIC C)
3. Remove trigger assembly by lifting it up and out of FX
trigger frame. (SEE PIC D)
E
G
F
D
A
C
B