Dangerous power FUSION FX, Руководство пользователя

Страница: 17 / 38

W W W . D A N G E R O U S P O W E R . C O M
30 31
glObAl setup Menu
(COntinueD)
- Enabled
This setpoint turns on/off the Breakout Mode operation.
- Start Pulls
Enable the Breakout Mode to choose which trigger pull will activate
this mode.
- Added BPS
While the Breakout Mode is active, this setpoint lets you add
additional balls per second to your programmed rate of fire.
- Firing Mode
This sets the mode the marker will fire in once Breakout Mode is
activated.
- Breakout End
This setpoint lets you choose how the Breakout Mode will end.
Choose 0 to end the Breakout Mode operation once the trigger
is idle 0.2 seconds, or choose the length of time (in seconds) the
Breakout Mode will remain active.
glObAl setup Menu
(COntinueD)
- Auto Clear
When this is set to ON, the Breakout function will have to be
re-enabled via the programming menu or through the Hot Start
option. If Auto Clear is set to OFF, simply power cycle your marker
to re-enable the Breakout mode.
3.Tourney Rules
The FX provides fully programmable tournament operations,
allowing you to stay compliant in the event of any future tournament
rule changes. Default support is provided for PSP, NXL and
Millennium tournament formats. The user can also reconfigure these
rules for other tournament formats or any new tournament format that
is adopted in the future.
- Ramp Semi Shots
Defines the number of semi shots required before any ramping is
allowed.
- Ramp Pull Rate
This is the trigger pull rate (trigger pulls per second) that needs to
be achieved before ramping. Any semi shots defined must first
be satisfied prior to ramping by pull rate. If this setpoint is zero,
the marker will ramp immediately after the defined number of
semishots are satisfied.
Start Menu > Program Menu > Global Setup Menu > Tourney Rules