Danfoss VX Solo II Series, Инструкция по установке и эксплуатации

Страница: 26 / 44

26 DKDHR VI.GP.P2.02 Danfoss District Energy
Instructions for installation and use VX Solo II substations
AHQM / AMV 150
The VX Solo II substations can be supplied with a self-acting flow
controller with integrated control valve Danfoss AHQM and an elec-
trical actuator AMV 150
The controller closes when set max. flow is exceeded.
The flow-controller is equipped with excess pressure safety valve,
which protects the actuator from too high differential pressure.
The electrical actuator has undergone a functional test from factory.
In case of operating disturbances the actuator can be closed manu-
ally turning the manual override knob on top of actuator counter-
clockwise.
Please see enclosed instructions,
Electrical actuator AMV 150
Flow-controller with integrated control valve AHQM
AHQM / AMV 13
VX Solo II substations can be supplied with a self-acting flow con-
troller with integrated control valve Danfoss AHQM and an electrical
actuator AMV 13.
The controller closes when set max. flow is exceeded.
The flow-controller is equipped with excess pressure safety valve,
which protects the actuator from too high differential pressure.
The electrical actuator has undergone a functional test from factory.
Please see enclosed instructions,
Electrical actuator AMV 13
Flow-controller with integrated control valve AHQM
The AMV 13 is typically used on units for floor heating in combination
with a safety thermostat (Jumo) to protect from overheating.
AHQM AMV 13
'+6076, (,+ ‹ 'DQIRVV
,QVWUXFWLRQV
$09
5 5
$099096 $09$940 $099%
1
1
Press and hold the button (on
the bottom side of the actuator)
during manual override.
Manual override (AMV 150)
Instructions
AMV 150
73691180 DH-SMT/SI VI.KU.N2.1J © Danfoss 01/2008 1
ENglIsh Actuators for three point control AMV 150 www.danfoss.com Page 2
DANsK Motorer til 3-punkts styring AMV 150 www.danfoss.dk Side 3
DEUTsCh Stellantriebe für 3-Pkt.- Eingangssignal AMV 150 www.danfoss.de Seite 3
sVENsKA Motor för 3-punktsreglering AMV 150 varme.danfoss.se Sida 4
NEDERlANDs Servomotor met 3-puntssturing AMV 150 www.danfoss.nl Pagina 4
lIETUVIŲ K. Pavaros trijų padėčių valdymui AMV 150 www.danfoss.lt 5 puslapis
lATVIsKI Motori trīs punktu kontrolei AMV 150 www.danfoss.com Lpp. 5
MAgYAR Szelepmozgatók hárompontos szabályozáshoz AMV 150 www.danfoss.com 6. oldal
ČEsKY Servopohony s tříbodovým regulačním signálem AMV 150 www.danfoss.cz Strana 6
POlsKI Siłowniki sterowane sygnałem 3-punktowym AMV 150 www.danfoss.pl Strona 7
РУССКИЙ Электроприводы для трехпозиционного регулирования AMV 150 www.danfoss.ru Страница 7
AMV 150 + AMV 150 + AMV 150 +
VS2 (DN 15) VMV AVQM (DN 15)
AHQM
1
Installation Guide
AHQM, DN 40-100
Danfoss Heating VI.LR.K1.00 DH-SMT/SI
Δp
v
+ –
Q
max
 Δp
v
≥ 0.5 bar
P
test
= 1.5 × PN
Δp
v
: 0.5-4.0 bar
DN 40, 50 DN 50-100
AMV(E) 435 +
AHQM DN 40, 50
AMV(E) 435 +
AHQM DN 50-100
AMV(E) 438 SD +
AHQM DN 40, 50
AMV(E) 438 SD +
AHQM DN 50-100
1
Installation Guide
AHQM, DN 40-100
Danfoss Heating VI.LR.K1.00 DH-SMT/SI
Δp
v
+ –
Q
max
 Δp
v
≥ 0.5 bar
P
test
= 1.5 × PN
Δp
v
: 0.5-4.0 bar
DN 40, 50 DN 50-100
AMV(E) 435 +
AHQM DN 40, 50
AMV(E) 435 +
AHQM DN 50-100
AMV(E) 438 SD +
AHQM DN 40, 50
AMV(E) 438 SD +
AHQM DN 50-100