18 DKDHR
VI.GP.P2.02
Danfoss District Energy
Instructions for installation and use
VX Solo II substations
VX Solo II HWP (ECL210/A247)
8.0 Description of VX Solo II
VX Solo II are district heating substations for indirect heating for
single-family houses, semi-detatched and terraced houses as well
as flats. With one or two heating circuits for radiator and/or floor
heating and with connection pipes for domestic hot water cylinder
on primary or secondary side.
As standard the substations are supplied with fitting piece(s) for
mounting of heat meter(s).
The VX Solo II substations are available in various variants, - please
see photos to the right.
The supply temperature to the heating circuit can be regulated by
a self-acting thermostatic valve (type VX Solo II (T°C). In rooms with
floor heating, the temperature is regulated using the floor heating
thermostat for the room in question. In rooms with radiators, the
temperature is regulated using the radiator thermostats.
Alternatively, the heating circuits can be regulated using fully auto-
matic Danfoss ECL weather compensation equipment, - a Danfoss
ECL controller in combination with electronic actuator(s). The ECL
controller acts as the brain of the heating system. It lets you easily
control and optimise system performance and operation.
VX Solo II substations are also fitted with pump(s).
As an option the VX Solo II substations can be equipped with a ther-
mostat with safety monitor.
The VX Solo II variants are designed for wall mounting and offer vari-
able connection possibilities as connection of pipes can be made
both in top or bottom of the substation.
General information
PLEASE NOTE! Some models may have a slightly different appearance,
as variants with other components may be supplied.
Supplier instructions for the fitted components will always be supplied
together with the substation.
VX Solo II H2 (ECL 210/A260)
VX Solo II (T°C)
VX Solo II H (ECL 210/A230)
VX Solo II HWP (ECL 210/A237))
VX Solo II H2WP (ECL 310/A377
VX Solo II HWS (ECL 210/A247
VX Solo II H2WS (ECL 210/A267)
VX Solo II HWS (ECL 210/A237)
VX Solo II H2WP (ECL 210/A260)
Содержание VX Solo II Series
Страница 40: ...40 DKDHR VI GP P2 02 Danfoss District Energy Instructions for installation and use VX Solo II substations ...
Страница 42: ...42 DKDHR VI GP P2 02 Danfoss District Energy Instructions for installation and use VX Solo II substations ...
Страница 43: ...43 43 Danfoss District Energy VI GP P2 02 DKDHR Instructions for installation and use VX Solo II substations ...