manualshive.com logo in svg
background image

55

Danfoss District Energy 

VI.HE.M1.02 

DKDHR

Instructions for installation and use 

VX Solo HWS  substations

4.0  Enduser instructions, General

Instructions

Please read these instructions carefully before installing and commis-

sioning this substation. The manufacturer accepts no liability for loss 

or damage resulting from failure to comply with these instructions 

for use. Read and follow these instructions carefully to prevent the 

risk of physical injury and/or damage to property. Exceeding the 

recommended operating parameters appreciably increases the risk 

of personal injury and/or damage to property.

Installation, commissioning and maintenance must be carried out 

by qualified and authorised personnel (both plumbing and electri-

cal work).

Once the station has been installed and is operating, there is 

nor-

mally

 no need to alter the settings or other functions. The district 

heating substation is very reliable and easy to operate.

If necessary, you can change the temperature settings as described 

on page 6. For more detailed information about the substation, 

see the sections concerning installation and commissioning.

Description

These instructions apply to substation type VX Solo HWS, which is 

a district heating substation for indirect heating for single-family 

houses, semi-detatched and terraced houses as well as flats. With 

one heating circuit for radiator and/or floor heating and with con-

nection pipes for domestic hot water cylinder on secondary side. 

For wall-mounting.

The HE supply temperature is controlled by a self-acting temperature 

controller Danfoss AVTB.

An immersion control thermostat of your choice choice, used to 

control the water temperature in the hot water cylinder, must be 

mounted on site.

As optional supply, Danfoss offers an immersion control thermostat 

type ITC, which must be ordered separately and supplied loose to-

gether with the substation for mounting on site.

The ITC must be mounted in the 2/3 point of the DHW cylinder.

The VX Solo HWS is specificly prepared for connection of a TP9000 

programmable room thermostat / DHW time controller, which allows 

heating and DHW operation according to demand. The integrated 

room thermostat will open/close the zone valve for heating opera-

tion and the DHW sensor in the cylinder or the DHW timer will open/

close the zone valve for DHW operation. 

We recommend regular inspections of the substation - ideally in 

connection with readings of the district heating meter. 

Pay special attention to any leaks and an excessively high return 

temperature in the district heating circuit (poor cooling of the district 

heating water). Cooling – i.e. the difference between the supply and 

return temperature of the district heating water – has a significant ef-

fect on the overall energy economy. Therefore, it is important to focus 

on the supply and return temperature in the heating system. 

The difference should typically be 30–35°C in systems that operate 

with radiators. 

Irregularities

When reading the meters, check all joints and connections for leaks. 

Check the troubleshooting section before contacting your pro-

fessional provider.

Warning! Hot surfaces

Parts of the substation may be very hot and can cause burn in-

juries. Be very careful when you are in the immediate vicinity of 

the unit.

Warnings about high pressure and high temperature

The maximum supply temperature in the district heating net-

work can be up to 110°C and the operating pressure can be up 

to 16 bar. This may result in a risk of scalding from touching the 

substation and from outflow of the medium (water/steam). Ex-

ceeding the substation design data and operating parameters for 

pressure and temperature carries an appreciable risk of personal 

injury and/or damage to property.

Emergencies

In the event of fire, leaks or other hazards, immediately shut off 

all sources of energy to the substation, if possible, and call for 

appropriate assistance.

If the domestic hot water is discoloured or malodorous, shut off 

all ball valves on the substation and the storage cylinder, notify 

all users and call for professional assistance without delay.

Содержание VX Solo HWS





























Отзывы: