Assemble spool/sleeve set
To assemble spool/sleeve set with springs, cross pin, and ring, folow these steps.
1. Place the curved springs between the flat ones and press them into place.
Press springs into place
Configuration of spring set (14):
There can be different numbers of curved springs, depending on configuration of spring set.
There can be 2, 4, or 6 curved springs.
Spring configuration
Some spool and sleeve sets for VSPP must be positioned correctly, relative to each other. Small marks
are present of both the spool and sleeve, close to one of the slots for the spring set.
Most spool and sleeve sets for VSPP have no marks, so those can be positioned relative to each other,
in either of the 2 positions possible.
Service Manual
VSPP Steering unit
VSPP assembly
20 |
©
Danfoss | November 2019
AX319758618681en-000101
