Outputs For Actuators........................................................................ 42
Parallel Connection Of Motors......................................................... 73
PC-based Configuration Tool MCT 10 Set-up Software.......... 76
Peak Voltage On Motor.................................................................... 117
PELV - Protective Extra Low Voltage.............................................. 31
Potentiometer Reference.................................................................. 83
Programming Order............................................................................ 24
Protocol Overview................................................................................ 87
Pt1000 Temperature Sensor............................................................. 42
Public Supply Network....................................................................... 29
Radiated Emission......................................................................... 28, 31
Rated Motor Speed................................................................................ 6
Read Holding Registers (03 HEX).................................................... 99
Real-time Clock (RTC).......................................................................... 43
Reference Handling............................................................................. 23
Removal Of Knockouts For Extra Cables...................................... 65
Residual Current Device..................................................................... 81
Save Drive Settings.............................................................................. 76
Screened/armoured............................................................................ 70
Screened/armoured............................................................................ 64
Screening Of Cables............................................................................ 64
Set Speed Limit And Ramp Time.................................................... 72
Short Circuit (Motor Phase – Phase).............................................. 33
Static Overload In VVCplus Mode................................................... 33
Stopping Category 0 (EN 60204-1)................................................. 16
Switches S201, S202, And S801....................................................... 71
Telegram Length (LGE)....................................................................... 88
Tightening Of Terminals.................................................................... 62
Torque Characteristics..................................................................... 112
Transmitter/sensor Inputs................................................................. 42
Tuning The Drive Closed Loop Controller................................... 25
Index
VLT
®
Refrigeration Drive Design Guide
MG16G102 - VLT
®
is a registered Danfoss trademark
135