![background image](http://html1.mh-extra.com/html/danfoss/vlt-series/vlt-series_programming-manual_3460644031.webp)
0-20 Display Line 1.1 Small
Option:
Function:
[2138]
Ext. 2 Feedback
[Unit]
The value of the feedback signal for
extended Closed Loop Controller 2
[2139]
Ext. 2 Output [%]
The value of the output from
extended Closed Loop Controller 2
[2157]
Ext. 3 Reference
[Unit]
The value of the reference for
extended Closed Loop Controller 3
[2158]
Ext. 3 Feedback
[Unit]
The value of the feedback signal for
extended Closed Loop Controller 3
[2159]
Ext. 3 Output [%]
The value of the output from
extended Closed Loop Controller 3
[2230]
No-Flow Power
The calculated No Flow Power for
the actual operating speed
[2316]
Maintenance Text
[2580]
Cascade Status
Status for the operation of the
Cascade Controller
[2581]
Pump Status
Status for the operation of each
individual pump controlled by the
Cascade Controller
[3110]
Bypass Status
Word
[3111]
Bypass Running
Hours
[9913]
Idle time
[9914]
Paramdb requests
in queue
[9920]
HS Temp. (PC1)
[9921]
HS Temp. (PC2)
[9922]
HS Temp. (PC3)
[9923]
HS Temp. (PC4)
[9924]
HS Temp. (PC5)
[9925]
HS Temp. (PC6)
[9926]
HS Temp. (PC7)
[9927]
HS Temp. (PC8)
0-21 Display Line 1.2 Small
Select a variable for display in line 1, middle position.
Option:
Function:
[1614]
*
Motor Current The options are the same as those listed
in
.
0-22 Display Line 1.3 Small
Select a variable for display in line 1, right position.
Option:
Function:
[1610]
*
Power [kW] The options are the same as those listed in
.
0-23 Display Line 2 Large
Select a variable for display in line 2.
Option:
Function:
[1613]
*
Frequency The options are the same as those listed in
.
0-24 Display Line 3 Large
Select a variable for display in line 3.
Option:
Function:
[30121]
*
Mains Frequency The options are the same as those
listed in
0-25 My Personal Menu
Array [20]
Range:
Function:
Size
related
*
[0 -
9999 ]
Define up to 20 parameters to appear in
the Q1 Personal Menu, accessible via the
[Quick Menu] key on the LCP. The
parameters will be displayed in the Q1
Personal Menu in the order they are
programmed into this array parameter.
Delete parameters by setting the value to
‘0000’.
For example, this can be used to provide
quick, simple access to just one or up to
20 parameters which require changing on
a regular basis (e.g. for plant maintenance
reasons) or by an OEM to enable simple
commissioning of their equipment.
3.2.4 0-3* LCP Custom Readout
It is possible to customize the display elements for various
purposes: *Custom Readout. Value proportional to speed
(Linear, squared or cubed depending on unit selected in
) *Display Text. Text string stored
in a parameter.
Custom Readout
The calculated value to be displayed is based on settings
in
(linear only),
,
4-13 Motor Speed High Limit [RPM]
,
and actual speed.
Parameter Description
VLT
®
HVAC Drive Programming Guide
30
MG.11.CC.02 - VLT
®
is a registered Danfoss trademark
3
3