Danfoss VLT Safety Option MCB 150, Руководство по эксплуатации, Страница: 5 / 76

5.2.2 Initial Commissioning 34
5.2.3 Safety Option Customisation 34
5.2.4 Setting up the Encoder 34
5.2.5 Commissioning Test 35
5.3 Operation 35
6 General Parameter Set-up
36
6.1 Configuration 36
6.1.1 General Parameter Set-up 36
6.1.2 Safety Functions Configuration 36
6.1.3 Password Protection 36
6.1.3.1 Password Forgotten 37
6.2 Reset and Status over Fieldbus 37
6.2.1 Reset of Safety Option and Pending Safe Function 37
6.2.2 Retrieving Safety Option Status 37
6.3 Parameter List
40
7 Service and Repair
46
7.1 Updates, Servicing and Modifications 46
7.2 Repair
46
7.3 Replacing
46
7.3.1 Removing the Safety Option 46
7.3.2 Replacing the Safety Option 46
7.3.3 Copying Safe Parameter Set-up 47
7.4 Commissioning Test
51
7.4.1 Safety Guidelines 51
7.4.2 Condition before Performing the Commissioning Test 51
7.4.3 Safety Functions of the Frequency Converter 53
7.5 Disposal 59
8 Warnings and Alarms
60
8.1 Fault Types and Messages
60
8.1.1 Messages 60
8.2 Warnings and Alarms
61
8.2.1 Safety Option Warning 68
8.2.2 Safety Option Reset Message 68
9 Technical Specifications
70
9.1 Consumption
70
9.2 Inputs
70
9.3 Outputs 71
9.4 Other Specifications 71
Contents Operating Instructions
MG34W302 Danfoss A/S © Rev. 2014-02-11 All rights reserved. 3