Danfoss VLT OneGearDrive, Руководство по эксплуатации

Страница: 7 / 44

•
•
•
•
•
•
•
•
-
-
2 Safety
2.1 Safety Symbols
The following symbols are used in this guide:
W A R N I N G
Indicates a potentially hazardous situation that could result in death or serious injury.
C A U T I O N
Indicates a potentially hazardous situation that could result in minor or moderate injury. It can also be used to alert against un-
safe practices.
N O T I C E
Indicates important information, including situations that can result in damage to equipment or property.
2.2 Qualified Personnel
Installation, commissioning, and maintenance may only be carried out by qualified personnel. For the purposes of this manual and
the safety instructions in this manual, qualified personnel are trained personnel who are authorized to fit, install, commission,
ground, and label equipment, systems, and circuits in accordance with the standards for safety technology and who are familiar
with the safety concepts of automation engineering.
Additionally, the personnel must be familiar with all the instruction and safety measures described in this manual. They must have
suitable safety equipment and be trained in first aid.
2.3 Due Diligence
The operator and/or fabricator must ensure that:
The VLT® OneGearDrive® is used only as intended.
The VLT® OneGearDrive® is only operated in a perfect operational condition.
The Operating Guide is always available near the VLT® OneGearDrive® in complete and readable form.
The VLT® OneGearDrive® and its components are fitted, installed, commissioned, and maintained only by adequately qualified
and authorized personnel.
These personnel are regularly instructed on all relevant matters of occupational safety and environmental protection, as well as
the contents of the Operating Guide and the instructions it contains.
The product markings and identification markings applied to the VLT® OneGearDrive®, as well as safety and warning instruc-
tions, are not removed and are always kept in a legible condition.
The national and international regulations regarding the control of machinery and equipment, that are applicable at the place
of use, are complied with.
The users always have all current information relevant to their interests about the VLT® OneGearDrive® and its use and opera-
tion.
2.4 Safety Instructions and Precautions
W A R N I N G
HIGH VOLTAGE
High voltage, which can lead to death or serious injury, is present on the connectors.
Before working on the power connectors (disconnecting or connecting the cable to the VLT® OneGearDrive®), disconnect the
power supply to the drive and wait for the discharge time to elapse (see the drive Operating Guide).
Installation, start-up, maintenance, and decommissioning must only be performed by qualified personnel.
AQ347551551757en-000101 / 130R0239 | 7 Danfoss A/S © 2020.12
Safety
VLT® OneGearDrive®
Operating Guide