Danfoss VLT ISD 410, Руководство по эксплуатации

Страница: 4 / 57

10.1 Maintenance tasks 33
10.1.1 Replacing the Shaft Seal 33
10.2 Inspection during Operation 33
10.3 Repair 33
10.3.1 Cable Replacement 34
10.3.1.1 Feed Cable Replacement 34
10.3.1.2 Loop Cable Replacement 35
10.4 Servomotor Replacement
35
10.4.1 Dismounting 35
10.4.2 Fitting and Commissioning 35
11 Decommissioning and Disposal
36
11.1 Decommissioning 36
11.2 Dismounting
36
11.3 Product Returns
36
11.4 Recycling and Disposal
37
11.4.1 Recycling 37
11.4.2 Disposal 37
12 Specifications
38
12.1 Nameplate
38
12.2 Storage
38
12.2.1 Long-term Storage 38
12.3 Characteristic Data
39
12.3.1 Servomotor without Brake 39
12.3.2 Servomotor with Brake 40
12.4 Dimensions
41
12.4.1 Servomotor with ISD Flange, without Brake 41
12.4.2 Servomotor with ISD Flange and Brake 42
12.4.3 Servomotor with IEC Flange, without Brake 43
12.4.4 Servomotor with IEC Flange and Brake 44
12.5 Motor Characteristics 45
12.6 Characteristic Curves 45
12.6.1 S1 Duty Cycle (Continuous duty) 45
12.6.2 S3 Service Cycle (Intermittent periodic service) 45
12.6.2.1 Servomotors 175G7801/02/09/10/17/18 46
12.6.2.2 Servomotors 175G7803/04/11/12/19/20 46
12.6.2.3 Servomotors 175G7805/06/13/14/21/22 46
12.6.2.4 Servomotors 175G7807/08/15/16/23/24 46
12.7 General Specifications and Environmental Conditions
47
12.8 Permitted Forces
47
Contents
VLT
®
ISD 410 Servomotor Operating Instructions
MG75D102 - VLT
®
is a registered Danfoss trademark 3