VLT
®
FCM Series
Programming
520 Data read-out: Current
(MOTOR CURRENT)
Value:
XXX.XX A
[XXXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is a calculated value of the
given motor current.
This value is updated every 320 ms.
521 Data read-out: Torque
(TORQUE)
Value:
XXX.X %
[XXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is the torque, with sign, supplied
to the motor shaft. The value is given as a
percentage of the rated torque.
There is not exact linearity between 160% motor
current and torque in relation to the rated torque.
Due to tollerences and temperature differences some
motors supply more torque than that. Consequently,
the min. value and the max. value will depend
on the max./min. motor current.
This value is updated every 320 ms.
522 Data read-out: Power, kW
(POWER (KW))
Value:
XX.XX kW
[XXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is calculated on the basis of the
actual motor voltage and motor current.
This value is updated every 320 ms.
523 Data read-out: Power, HP
(POWER (HP))
Value:
XX.XX HP (US)
[XXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is calculated on the basis of
the actual motor voltage and motor current. The
value is indicated in the form of HP.
This value is updated every 320 ms.
524 Data read-out: Motor voltage
(MOTOR VOLTAGE)
Value:
XXX.X V
[XXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is a calculated value used
for controlling the motor.
This value is updated every 320 ms.
525 Data read-out: DC link voltage
(DC LINK VOLTAGE)
Value:
XXXX V
[XXXX]
Function:
This parameter can be read out via the serial
communication port.
Description of choice:
The value shown is a measured value.
The value is filtered, which means that approx. 1.3
seconds may pass from an input value changes
until the data read-out changes values.
✭
= factory setting. () = display text [] = value for use in communication via serial communication port
MG.03.H3.02 - VLT is a registered Danfoss trademark
71
