![background image](http://html1.mh-extra.com/html/danfoss/vlt-fc-103/vlt-fc-103_programming-manual_3529409035.webp)
3.2.5 0-5* Copy/Save
Copy parameter settings between set-ups and to/from the
LCP.
0-50 LCP Copy
Option:
Function:
[0]
*
No copy
No function
[1]
All to LCP
Copies all parameters in all set-ups from the
frequency converter memory to the LCP
memory. For service purposes it is
recommended to copy all parameters to the
LCP after commissioning.
[2]
All from
LCP
Copies all parameters in all set-ups from the
LCP memory to the frequency converter
memory.
[3]
Size indep.
from LCP
Copies only the parameters that are
independent of the motor size. The latter
selection can be used to programme several
frequency converters with the same function
without disturbing motor data which are
already set.
This parameter cannot be adjusted while the motor is
running.
0-51 Set-up Copy
Option:
Function:
[0]
*
No copy
No function
[1]
Copy to set-
up 1
Copies all parameters in the present
Programming Set-up (defined in
) to Set-up 1.
[2]
Copy to set-
up 2
Copies all parameters in the present
Programming Set-up (defined in
) to Set-up 2.
[3]
Copy to set-
up 3
Copies all parameters in the present
Programming Set-up (defined in
) to Set-up 3.
[4]
Copy to set-
up 4
Copies all parameters in the present
Programming Set-up (defined in
) to Set-up 4.
[9]
Copy to all
Copies the parameters in the present set-up
over to each of the set-ups 1 to 4.
3.2.6 0-6* Password
0-60 Main Menu Password
Range:
Function:
100
*
[-9999 -
9999 ]
Define the password for access to the Main
Menu via the [Main Menu] key. If
0-61 Access to Main Menu w/o Password
is
set to
[0] Full access
, this parameter will be
ignored.
0-61 Access to Main Menu w/o Password
Option:
Function:
[0]
*
Full access
Disables password defined in
.
[1]
LCP: Read only Prevent unauthorized editing of Main Menu
parameters.
[2]
LCP: No access Prevent unauthorized viewing and editing
of Main Menu parameters.
[3]
Bus: Read only
[4]
Bus: No access
[5]
All: Read only
[6]
All: No access
If
[0] Full access
is selected then
,
and
will be ignored.
0-65 Personal Menu Password
Range:
Function:
200
*
[-9999 -
9999 ]
Define the password for access to the My
Personal Menu via the [Quick Menu] key. If
0-66 Access to Personal Menu w/o Password
is set to
[0] Full access
, this parameter will
be ignored.
0-66 Access to Personal Menu w/o Password
Option:
Function:
[0]
*
Full access
Disables password defined in
.
[1]
LCP: Read only Prevents unauthorized editing of My
Personal Menu parameters.
[2]
LCP: No access Prevents unauthorized viewing and editing
of My Personal Menu parameters.
[3]
Bus: Read only
[4]
Bus: No access
[5]
All: Read only
[6]
All: No access
If
0-61 Access to Main Menu w/o Password
is set to
[0] Full
access
, this parameter will be ignored.
3.2.7 0-7* Clock Settings
Set the time and date of the internal clock. The internal
clock can be used for e.g. Timed Actions, energy log, Trend
Analysis, date/time stamps on alarms, Logged data and
Preventive Maintenance.
It is possible to program the clock for Daylight Saving
Time/summertime, weekly working days/non-working days
including 20 exceptions (holidays etc.). Although the clock
settings can be set via the LCP, they can also be set along
with timed actions and preventative maintenance
functions using the MCT 10 software tool.
Parameter Description
VLT
®
Refrigeration Drive Programming Guide
34
MG16H102 - VLT
®
is a registered Danfoss trademark
3
3