1 Introduction
1.1 Purpose of the Manual
This installation guide provides information for quick instal-
lation of a VLT
®
DeviceNet MCA 104 interface in the VLT
®
frequency converter.
The installation guide is intended for use by qualified
personnel. Users are assumed to be familiar with the VLT
®
frequency converter, with DeviceNet technology, and with
the PC or PLC that is used as a master in the system.
Read the instructions before installation and ensure that
instructions for safe installation are observed.
VLT
®
is a registered trademark.
1.2 Additional Resources
Resources available for the frequency converters and
optional equipment:
•
The
VLT
®
Operating Instructions
provide the
necessary information for getting the frequency
converter up and running.
•
The
VLT
®
Design Guide
provides detailed
information about capabilities and functionality
to design motor control systems.
•
The
VLT
®
Programming Guide
provides greater
detail on working with parameters and many
application examples.
•
The
VLT
®
DeviceNet MCA 104 Installation Guide
provides information about installing the
DeviceNet and troubleshooting.
•
The
VLT
®
DeviceNet MCA 104 Programming Guide
provides information about configuring the
system, controlling the frequency converter,
parameter access, programming, troubleshooting,
as well as some typical application examples.
Supplementary publications and manuals are available
from Danfoss. See
www.danfoss.com/BusinessAreas/DrivesSo-
lutions/Documentations/VLT+TeDocumentation.htm
for listings.
1.3 Product Overview
1.3.1 Intended Use
This installation guide relates to the DeviceNet interface.
Ordering number:
•
130B1102 (non coated version)
•
130B1202 (conformal coated version)
DeviceNet is a low-level network that standardises
communications between industrial devices (sensors, limit
switches, motor controls) and high-level devices
(controllers). DeviceNet systems can be configured to
operate in a master-follower or a distributed control
architecture using peer-to-peer communication.
The DeviceNet interface is designed to communicate with
any master abiding by the DeviceNet standard.
VLT
®
DeviceNet MCA 104 is intended for use with:
•
VLT
®
HVAC Drive FC 102
•
VLT
®
AQUA Drive FC 202
•
VLT
®
AutomationDrive FC 301
•
VLT
®
AutomationDrive FC 302
1.3.2 Items Supplied
When the fieldbus option is not factory mounted, the
following items are supplied:
•
Fieldbus option and connector
•
LCP cradle
•
Front covers (in various sizes)
•
Stickers
•
Accessories bag (including EMC bracket)
•
Installation Guide
1.4 Approvals and Certifications
More approvals and certifications are available. For more
information, contact a Danfoss local partner.
1.5 Disposal
Do not dispose of equipment containing
electrical components together with
domestic waste.
Collect it separately in accordance with
local and currently valid legislation.
Introduction
VLT
®
DeviceNet MCA 104
2
Danfoss A/S © Rev. 03/2015 All rights reserved.
MG33D502
1
1
Содержание VLT DeviceNet MCA 104
Страница 2: ......
Страница 17: ...Index Installation Guide MG33D502 Danfoss A S Rev 03 2015 All rights reserved 15...