![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840328.webp)
Option
Name
Description
[20]
125 Kbps
[21]
250 Kbps
[22]
500 Kbps
Parameter 10-02 MAC ID
Table 581: Parameter 10-02 MAC ID
10-02 MAC ID
Default value: Size related
Parameter type: Range, [N/A]
Setup: 2 setups
Conversion index: 0
Data type: Uint8
Change during operation: True
Select the station address. Every station connected to the same network must have an unambiguous address.
Parameter 10-05 Readout Transmit Error Counter
Table 582: Parameter 10-05 Readout Transmit Error Counter
10-05 Readout Transmit Error Counter
Default value: 0
Parameter type: Range, 0 - 255
Setup: All setups
Conversion index: 0
Data type: Uint8
Change during operation: True
View the number of CAN control transmission errors since the last power-up.
Parameter 10-06 Readout Receive Error Counter
Table 583: Parameter 10-06 Readout Receive Error Counter
10-06 Readout Receive Error Counter
Default value: 0
Parameter type: Range, 0 - 255
Setup: All setups
Conversion index: 0
Data type: Uint8
Change during operation: True
View the number of CAN control receipt errors since the last power-up.
Parameter 10-07 Readout Bus Off Counter
Table 584: Parameter 10-07 Readout Bus Off Counter
10-07 Readout Bus Off Counter
Default value: 0
Parameter type: Range, 0 - 255
Setup: All setups
Conversion index: 0
Data type: Uint8
Change during operation: True
5.11.2 10-1* DeviceNet
Parameter 10-10 Process Data Type Selection
Table 585: Parameter 10-10 Process Data Type Selection
10-10 Process Data Type Selection
Default value: Size related
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the instance (telegram) for data transmission. The instances available depend on the setting of
parameter 8-10 Control Word
Profile
. When
parameter 8-10 Control Word Profile
is set to
[0] FC Profile
, options
[0] INSTANCE 100/150
and
[1] INSTANCE 101/151
in this
parameter are available. When
parameter 8-10 Control Word Profile
is set to
[5] ODVA
, options
[2] INSTANCE 20/70
and
[3] INSTANCE
AU275636650261en-000101 / 130R0334
328 | Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide