•
•
•
•
•
•
•
•
•
1 Overview
1.1 Safety and Installation Awareness
Before starting installation, get familiarized with all safety guidelines and precautions in this guide. Additional resources - including
the VLT® Safe Torque Off Operating Guide for VLT® AutomationDrive EZ FC 321, the Programming Guide, and the Application Guide
- can be downloaded at
www.danfoss.com/service-and-support
1.2 Tools Needed
The following tools are required for installing the VLT® AutomationDrive EZ FC 321.
Lifting aids to place the unit into position.
Drill with 10 mm and 12 mm drill bits.
Tape measurer.
Torx, Phillips, and slotted screwdrivers (T15, T20, T25, T30, T50, PZ1, SL1, and SL2).
Wrench with extensions and 7–17 mm sockets.
Wire crimper.
Sheet metal punch and/or pliers for cable entry plate.
1.3 Items Supplied
Items supplied vary according to product configuration.
Make sure that the items supplied and the information on the nameplate correspond to the order confirmation.
Check the packaging and the drive visually for damage caused by inappropriate handling during shipment. File any claim for
damages with the carrier. Retain damaged parts for clarification.
e3
0b
j0
18
.1
0
R
US LISTED
76 X1 E134261 IND. CONT. EQ.
UL Voltage 525-600 V
DANGER
See manual for special condition/mains fuse
voir manual de conditions speciales/fusibles
`
15 min.
VLT
R
Automation Drive
T/C: FC-321P75KT5P20H2XGCXXXSXXXXAXBXCXXXXDX
P/N: 134G6302 S/N: 999999G999
55 kW / 75 kW; 75 kW / 90 kW (NO)
IN: 3x380-500V 50/60Hz 87/86A; 161/145A (NO)
OUT: 3x0-Vin 0-590Hz 87/83A; 105/100A (NO)
Chassis/IP20 Tamb. 50
C /122 F
o
o
MADE IN USA
Danfoss A/S
6430 Nordborg Denmark
www.danfoss.com
1
2
3
4
5
6
7
8
9
10
Illustration 1: Nameplate Example
AN354546796134en-000201 / 130R0954
2 | Danfoss A/S © 2021.05
Overview
VLT®AutomationDrive EZ FC 321
Installation Guide
Содержание VLT AutomationDrive EZ FC 321
Страница 1: ...Installation Guide VLT AutomationDrive EZ FC 321 0 33 200 hp vlt drives danfoss com ...
Страница 2: ......