Danfoss VLT AHF 005, Инструкция по эксплуатации

Страница: 15 / 18

AHF 005/010
■
Commissioning
Prior to initial switch-on of the filter module
check the wiring for completeness,
short-circuit and earth fault.
If the wiring is not correct, a non-intended
operation of controller and/or filter
module is possible.
First powering up
1. Switch on mains supply :
- The filter module is ready for operation at once.
2. Check the readiness of the frequency converter:
- Proceed in accordance with the operating
instructions of the frequency converter.
MG.80.B2.02 - VLT is a registered Danfoss trademark
14