manualshive.com logo in svg
background image

3

Installation 

Instructions

GB

Important note RF products:

 Ensure that there are no large metal objects, such 

as boiler cases or other large appliances, in line of sight between the transmitter 
and receiver as these will prevent communication between thermostat and receiver.

Product Specifi cation

GB - Installation Instructions

Please Note:

This product should only be installed by a 
qualifi ed electrician or competent heating 
installer and should be in accordance with the 
current edition of the IEEE wiring regulations. 

Thermostat features

TP5000

TP5000-RF

Power supply

2 x AA/MN1500/LR alkaline cells

Memory back-up

1 min for battery change 

Switching action of output relay

1 x SPDT, Type 1B

N/A

Switch rating of relay contact

6(2)A, 10-230Vac

N/A

Transmission frequency (RF model)

N/A

433.92MHz

Transmitter range (RF model)

N/A

30m max

Temperature range

5-30°C

Dimensions, mm

110 wide, 88 high, 28 deep

Design standard

EN60730-2-9 (EN300220 for RF)

Rated impulse voltage

2.5Kv

Ball hardness test

75°C

Control pollution situation

Degree 2

Temperature accuracy

±1°C

Time accuracy

±1 min.

 

Содержание TP5000 RF Si














Отзывы: