2.2 Mounting the Inverter
CAUTION
For safe handling of the inverter, two people must carry
the unit, or a suitable transport trolley must be used.
Safety boots must be worn.
Illustration 2.10 Position the Inverter
Tilt the inverter as shown in the illustration and place the
top of the inverter against the mounting bracket. Use the
two guides (1) at the top plate to control the inverter
horizontally.
Illustration 2.11 Secure the inverter
Lift the inverter upwards (2) over the top of the mounting
plate until the inverter tilts towards the wall (3).
Illustration 2.12 Place Inverter in Mounting Bracket
Place the lower part of the inverter against the mounting
bracket.
Illustration 2.13 Fasten screws
Lower (4) the inverter and make sure that the hook of the
inverter base plate is placed in the lower part of the
Installation
8
L00410309-09_02
2
2
www.neoenerji.com
