manualshive.com logo in svg
background image

VUIGB802  

© Danfoss | Energy Meters | 2018.01 | 7

Installation & User Guide 

SonoSelect and SonoSafe

2.6 Communication modules

Modules in general

To adapt the meter for various applications SonoSelect 10 and SonoSafe 10 features a slot for mounting 
communication modules.  
Each module features its own µ-controller and is powered by its own battery. 
Modules have their own parameter set which is saved in the module µ-controller flash memory. A local 
copy of the energy meter parameters used for communication is stored in the module.
Data from module is updated in meter every 10 minutes.
Power: Lithium Thionyl Chloride battery (half of AA size). 
2 pulse in/outputs have common ground.
Modules are galvanically isolated from main Energy Meter circuitry

Wired M-Bus module with 2 pulse inputs

Once installed the meter will display the icon for wired communication and pulse inputs in loop 2 of the 
display.
Wired M-Bus is galvanically isolated from µ-controller and pulse inputs.
The two pulse inputs can be programmed independently of each other (see specification for pulse input 
module).

M-Bus (primary)

Lithium Thionyl Chloride battery (half of AA size)

M-Bus (secondary)

M-Bus supply

Baud rate supported

300, 2400, 4800, 9600

Communication protocol

According to EN1434-3 & EN13757-3

Battery life time

16+1 year

Addressing

Serial number: 

sssss

vvNNy

yWW 

ss

: Primary address, 

yWWsssss

: Secondary address

Wireless OMS communication module, 868.95MHz with 2 pulse inputs

Once installed the meter will display the icon for wireless communication and pulse inputs in loop 2 of 
the display. The two pulse inputs can be programmed independently of each other (see specification for 
pulse input module).

Standard

Open Metering System (OMS) issue 4.0.2

Frequency

868.95 MHz

Antenna

Internal

Transmission power

10mW  (Max. 25mW; 13,9 dBm)

Mode

T1 mode

Encryption

AES 128 bit encryption (mode 5), Parameterized Static key

Sending interval

Fixed network: 15 min.

Telegram

Standard telegram*

Battery life time

16+1 year (with pulse inputs off)

Addressing

Serial number: 

sssss

vvNNy

yWW

 

yWWsssss

: Secondary address

* See section with data telegram.

Содержание SonoSafe

















Отзывы: