SONO 3500 CT
Operating Instructions, 07/2019, VI.SH.P2.02
73
Parameter lists
A
The following tables show the various parameters available via SIMATIC PDM.
The parameters are accessible at three different levels:
●
Read: Maintenance level
●
Read/Write (R/W): Specialist level (write access is only permitted after entering the user
password; default password is 1000)
●
Hardware locked (HW key): The parameter is only accessible when a HW key is mounted
Note
For type-approved and verified SONO 3500 CT flowmeter the settings are HW key protected
and therefore read only. This HW key is protected via the verification sealing. The verification
sealing can only be broken by the user with the acceptance of the local authorities.
A.1
Identification
Table A- 1
Identification parameters (FW 2.03 and EDD 1.02.07-01)
Parameter
Default value Value range
Access
level
Description
1
Application identifier
Identity
R/W
Customer application identification infor-
mation (max 16 characters)
2
Application location
Location
R/W
Customer application location information
(max 16 characters)
Device
5
Sensor size
Product de-
pendent
R/W
Pipe diameter of the sensor. It is only a
text field for measurement system infor-
mation. The value has no influence on the
measurement. Please see inner diameter
at pipe date in parameter 306
8
Totalizer unit
m
3
(Page 83)
R/W
Totalizer unit as text for volume. Change
the unit in parameter table if the device
menu "Unit guide (offline)" does not list the
wanted unit.
Note: The device display can show "m
3
"
unit only - other units cannot be shown on
the display, but will be used and shown
online via PDM
Содержание SONO 3500 CT
