manualshive.com logo in svg

Danfoss PVED-CLS, Руководство для стартапов, Страница: 28 / 48

Поделиться
Скачать
Danfoss PVED-CLS Скачать руководство пользователя страница 28

PVED-CLS AUX— soft-stop
AUX soft-stop can decrease flow to cylinders when wheels are close to end-stop to help prevent damage

and jerk. This parameter is used for mini steering wheel and open loop joystick devices.

Parameter

Conditions for value change

P3708-P3712

See 

PVED-CLS soft-stop

 on page 25 for configuration details.

Wheels may not return from end-stops or will do so slowly if flow is set too low.
Do not decrease P3708 below 200.

PVED-CLS AUX— anti-jerk
Anti-jerk can be used to decrease jerk in articulated vehicles. These parameters can be applied with a

mini steering wheel or open-loop joystick.

Parameter

Conditions for value change

P3698-P3718

See Section 11.6 Open Loop Anti-Jerk in the User Manual for configuration details.

PVED-CLS AUX— anti-drift
Anti-drift can be used to keep the mini steering wheel in the same position when driving straight ahead

by adding a percentage of full flow when the actual mini steering wheel angle does not match the ideal

angle.

Parameter

Conditions for value change

P3706, P3705

See Section 11.5 Open Loop Mini Wheel Anti-Drift in User Manual for details on setting parameters.

Application Guide

PVED-CLS startup guide

Parameter setting

 

28 | 

©

 Danfoss | October 2018

AB285975085591en-000101

Содержание PVED-CLS

















































Отзывы:

Нет отзывов