PVED-CLS valve calibration data
Navigate to the valve calibration section via System Navigator > Configuration > Valve Calibration
Data
Example parameter settings
Parameter
Condition for value change
P3162
If using an EHPS, set the value to -700. Otherwise, use default value.
P3164
If using an EHPS, set the value to 700. Otherwise, use default value.
P3166
Adjust toward 0 for smaller minimum flow in Closed Loop modes (auto-guidance) and vice versa. See deadband figure
below.
P3168
Adjust toward 0 for smaller minimum flow in Closed Loop modes (auto-guidance) and vice versa. See deadband figure
below.
P3170
Can be decreased but do not increase.
Application Guide
PVED-CLS startup guide
Parameter setting
20 |
©
Danfoss | October 2018
AB285975085591en-000101