Danfoss PAH 2 Скачать руководство пользователя страница 6

Страница: 6 / 80

Operation guide | Installation, Operation and Maintenance Manual for PAH 2-12.5 pumps

180R9379 | AQ188686503004en-000801 | PAH 2-12.5 | 07.2022

2.1 General information

Dangers that can arise from not following the

instructions:

When the pump or pump system is managed by

untrained personnel, there is a danger of:

• Death or fatal injuries

• Costly damages and claims

Electrical

hazard

All electrical installation work must only be

carried out by authorized personnel in

accordance with EN60204-1 and/or local

regulations .

It is recommended to install a lockable circuit

breaker to avoid inadvertent starting and/or

electrical hazard . The lockable circuit breaker

must be used during installation, operation and

maintenance .

It is recommended to place a local safety switch

nearby the pump, enabling service personnel to

cut power for the electric motor .

Protect the motor and other electrical equip-

ment from overloads with suitable equipment .

In case the pump delivered is ATEX certified, the

additional ATEX instruction must also be read .

Protective

garments

must be worn

Always wear suitable safety clothing when

handling the pump .

When working near the pump system, safety

shoes, safety glasses, hearing protection and

safety helmet must always be worn .

Under certain operational conditions the surface

of the pump can be above 60°C / 140°F .

Under these conditions the pump must be

labelled with a “Danger Hot” sign .

When using an electric motor, the motor must

always be supplied with adequate cooling

ventilation .

When using an electric motor together with a

VFD (

ariable

requency

rive), the motor must

be designed for operation with VFD . VFD

operation may increase the temperature inside

the electric motor if the motor is not designed

for VFD operation . This can damage the motor

and cause unintended breakdown .

Before start-up, the settings for all protective

devices, such as sensors/switches and safety

valves must be verified and free flow from safety

valves must be ensured .

All pipe and hose connections must be stress-

free mounted, securely fastened to the pump

and well supported . Improper installation will or

could result in personal injury and/or damage to

the pump .

Use of this manual does not relieve operation

and maintenance personnel of the responsibil-

ity of applying good judgment when operating

and maintaining the pump and its compo-

nents .

2.2 Preferred system design

Danfoss recommends to build systems with a

high degree of safety . Danfoss preferred system

design and P&ID are found in appendix 1, Data

sheet, and appendix 2, Instruction .

2. Safety

1.3 Manufacturer and customer service

address:

Danfoss A/S

High Pressure Pumps

Nordborgvej 81,

DK-6430 Nordborg

Denmark

Telephone: +45 7488 2222

Fax:

+45 7445 3831

Email: highpressurepumps@danfoss .com

Web: hpp .danfoss .com

Your local Danfoss pump distributor can be

found on our homepage .

1.4 Country specific information

1.4.1 United Kingdom

UK importer:

Danfoss Ltd .

22 Wycombe End

HP9 1NB Beaconsfield

United Kingdom

Содержание PAH 2

















































































Результаты поиска

Содержание PAH 2

Отзывы:

Бренды по названию

Популярные бренды

Danfoss PAH 2, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание PAH 2

Отзывы:

Бренды по названию

Популярные бренды