Danfoss OX024-x10, Руководство пользователя

Страница: 7 / 16

Signal Type Direction Range Description
CurChgLim
U16 Output 22 – 333
CurChgLim defines the maximum rate of change of current for the group of
outputs. This parameter is only used when the output’s PinConfig is 4 or 5.
111 is 11.1 mA/ms.
DitherFreq
U16 Output 40 – 250 Sets dither frequency when output dither is enabled for the group.
40 is 40 Hz.
ReqFreq U16 Output 30 – 4000 Sets the base PWM frequency for the group.
30 is 30 Hz.
Outputs – Digital Outputs
The output status of digital outputs on connectors and pins C1p06, C1p07, C1p08, C1p09, C1p10, and
C1p11 is described.
Signal Type Direction Range Description
Pin _MFOut
Bus —— ——
Config Bus —— ——
DefOutputValue BOOL Output —— Default Output value used when the IO module has not received an output
command within the previous TimeOut_Output.
DigOut BOOL
Output —— Output command
Outputs – MultiFunction Outputs
The output status of multifunction outputs on connectors and pins C1p12, C2p01, C2p02, C2p03, C2p04,
C2p05, C2p06, C2p07, C2p08, and C2p09 is described.
Signal Type Direction Range Description
Pin _MFOut Bus —— ——
Config Bus —— ——
PinConfig U16
Output 0 – 8 Output pin configuration
0: Digital Output, Push/Pull
1: Digital Output, Sourcing
2: Digital Output, Sinking
3: PWM Output, 0 – 10000 [0.01% positive duty]
4: PWM Output, 0 – 30000 [0.1 mA]
5: PWM Output, 0 – 30000 [0.1 mA] Dither Enabled
6: PVE Output, 0 – 10000 [0.01% of PVE Power]
7: HBridge Output, 0 – 10000 [0.01% positive duty]
8: PWM Output 0 – 30000 [0.1 mA] current control bidirectional
DefPinConfig U16
Output 0 – 8 Default Output pin configuration used at startup before the master/slave
communication initiates.
0: Digital Output, Push/Pull
1: Digital Output, Sourcing
2: Digital Output, Sinking
3: PWM Output, 0 – 10000 [0.01% positive duty]
4: PWM Output, 0 – 30000 [0.1 mA]
5: PWM Output, 0 – 30000 [0.1 mA] Dither Enabled
6: PVE Output, 0 – 10000 [0.01% of PVE Power]
7: HBridge Output, 0 – 10000 [0.01% positive duty]
8: PWM Output 0 – 30000 [0.1 mA] current control bidirectional
DefOutputValue U16 Output 0 – 10000 or
0 – 30000 Default Output value used when the I/O module has not received an output
command within the previous TimeOut_Output. The output range depends on
PinConfig.
1000 is 10.00%.
or
1000 is 100.0 mA.
User Manual
PLUS+1® Compliant OX024-x10 Function Block
OX024-x10 Function Block
© Danfoss | July 2018 11063395 | AQ00000104en-US0101 | 7