8-55 Set-up Select
Option:
Function:
Select control of the frequency converter set-
up selection via the terminals (digital input)
and/or via the fieldbus.
[0]
Digital
input
Activates the set-up selection via a digital
input.
[1]
Bus
Activates the set-up selection via the serial
communication port or fieldbus option.
[2]
Logic AND Activates the set-up selection via the fieldbus/
serial communication port, AND additionally
via one of the digital inputs.
[3]
*
Logic OR
Activate the set-up selection via the fieldbus/
serial communication port OR via one of the
digital inputs.
8-90 Bus Jog 1 Speed
Range:
Function:
100 RPM
*
[ 0 - par. 4-13
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
8-91 Bus Jog 2 Speed
Range:
Function:
200 RPM
*
[ 0 - par. 4-13
RPM]
Enter the jog speed. Activate this
fixed jog speed via the serial port
or fieldbus option.
8.3 Parameter Group 12-** Ethernet
8.3.1 12-0* IP Settings
12-00 IP Address Assignment
Option:
Function:
Selects the IP Address assignment method.
[0]
MANUAL IP-address can be set in
IP
Address.
[1]
DHCP
IP-address is assigned via DHCP server.
[2]
BOOTP
IP-address is assigned via BOOTP server.
[10]
*
DCP
DCP Assigned via the DCP protocol.
12-01 IP Address
Range:
Function:
0
*
[0 - 2147483647 ] Configure the IP address of the option.
Read-only if
set to DHCP or BOOTP.
12-02 Subnet Mask
Range:
Function:
0
*
[0 - 4244635647 ] Configure the IP subnet mask of the
option. Read-only if
set to DHCP or BOOTP.
12-03 Default Gateway
Range:
Function:
0
*
[0 -
2147483647 ]
Configure the IP default gateway of the
option. Read-only if
set to DHCP or BOOTP. In a
non-routed network this address is set
to the IP address of the IO Device
12-04 DHCP Server
Range:
Function:
0
*
[0 - 2147483647 ] Read only. Displays the IP address of the
found DHCP or BOOTP server.
12-05 Lease Expires
Range:
Function:
Size related
*
[ 0 - 0 ] Read only. Displays the lease-time left for
the current DHCP-assigned IP address.
12-06 Name Servers
Range:
Function:
0
*
[0 - 2147483647 ] IP addresses of Domain Name Servers.
Can be automatically assigned when
using DHCP.
12-07 Domain Name
Range:
Function:
0 [0 - 2147483647 ] Domain name of the attached network.
Can be automatically assigned when
using DHCP network.
12-08 Host Name
Range:
Function:
0 [0 - 2147483647 ]
Logical (given) name of option.
NOTE
The display of the frequency converter only shows the first
19 characters, but the remaining characters are stored in
the frequency converter.
12-09 Physical Address
Range:
Function:
0
*
[0 - 0 ] Read only Displays the Physical (MAC) address of
the option.
Parameters
MCA 124 EtherCAT Operating Instruction
36
MG92A302 - VLT
®
is a registered Danfoss trademark
8
8