Danfoss LonWorks Option Card, Инструкция по эксплуатации

Страница: 6 / 44

5
MG.60.N1.22 - VLT is a registered Danfoss trademark
VLT
®
5000 / VLT
®
6000 HVAC / VLT
®
8000 AQUA
This manual is intended to be used for both
instruction and reference. It only briefly
touches on the basics of the LonWorks
protocol whenever it is necessary for gaining
an understanding of the LonWorks profile for
drives and the LonWorks Option Card for the
Adjustable frequency drive.
This manual is also intended to serve as a
guideline when you specify and optimize your
Introduction
About This
Manual
What You
Should
Already Know
Assumptions
This manual provides comprehensive
instructions on the installation and set up of
the LonWorks Option Card for the
VLT 5000,
VLT 6000 and the VLT 8000 Adjustable
Frequency Drive to communicate over a
LonWorks network.
For specific information on installation and
operation of the adjustable frequency drive,
refer to the
VLT 5000 Installation, Operation
and Instruction Manual , VLT 6000 Installation,
Operation and Instruction Manual or VLT8000
Installation, Operation and Instruction Manual .
Portions of this manual are printed with the
permission of the Echelon Corporation and the
National Electrical Contractors Association of
the USA (NECA).
Echelon ® , LonTalk ® , Neuron ® and LonWorks ®
are registered trademarks of the Echelon
Corporation. VLT
® is a registered trademark
of Danfoss Inc.
The Danfoss LonWorks Option Card is
designed to communicate with any controller
node that supports the interfaces defined in this document. It is assumed that you have
full knowledge of the capabilities and
limitations of the controller node.
This manual assumes that you have a
controller node that supports the interfaces
in this document and that all the requirements
stipulated in the controller node, as well as the Adjustable Frequency Drive, are strictly
observed along with all limitations therein.
communication system. Even if you are an
experienced LonWorks programmer, we
suggest that you read this manual in its entirety
before you start programming, since important
information can be found in all sections.
References
LonMaker™ for Windows ® User's Guide.
VLT ® 5000 Installation, Operation and
Instruction Manual
(Referred to as the VLT Instruction Manual in
this document.)
VLT
®
6000 Installation, Operation and
Instruction Manual
(Referred to as the VLT Instruction Manual in
this document.)
VLT
®
8000 Installation, Operation and Instruction
Manual
(Referred to as the VLT Instruction Manual in
this document.)