Dimensions and installation
Dimensions
millimeter [inches]
Joystick
Mounting
Surface
Friction-held Boot
Spring
Return
Boot
Mating Connector (18 pin)
with Lead Wires Attached
105.6 [4.16]
80.00 [3.15]
"Forward"
Orientation Mark
61 [2.401]
(mounting screw centers)
(4 places)
75.6 [02.98] (maximum)
101.6 [04.0] (maximum)
165 [6.496] (maximum)
Ø3.218/3.2
[0.12669/0.126]
(typical)
Ø11.93/12.00
[0.46968/0.4724]
Ø9.518/9.531
[0.37472/0.37523]
32.0 [ 1.26]
15.0 [0.59]
9.7
[0.382]
The JS6000 is designed to be installed from the panel below, through a 68 mm [2.677 in] diameter hole.
Recommended mounting panel cut-out
61.00 [2.40]
30.50 [1.20]
61.00 [2.40]
30.50 [1.20]
Ø72.50 ± 0.50
Ø2.85 ± 0.020
Ø6.30 ± 0.12
Ø0.249 ± 0.00079
Technical Information
JS6000 Joystick Base
Product installation
32
520L0760 • Rev 1102 • November 2015
