Service guide
Disassembling and assembling iSave 21
10
180R9219 | 521B1171 | DKCFN.PI.003.K5.02 / 03.2016
16. Position the port plate over the guide pin.
17. Check that the port plate fits the center
bearing and the guide pin.
20. Mount all bolts in the flange and tighten
them to a torque of 30 Nm ± 3 Nm.
19. Position the port flange over the guide
pin.
21. Wet the shaft seal with clean filtered
water.
Do not use silicone grease.
Fit the shaft seal with the carbon surface
upward.
18. Change the O-ring in the flange and
position the guide pin.
O-ring
Guide pin
