Danfoss iC7 Series, Руководство по эксплуатации

Страница: 30 / 32

•
•
•
BUS
ST X1 X2
WARN
READY
FAULT
BUS
ST X1 X2
WARN READY FAULT
Z
OK
OFF RUN
REM
LOC
Speed
rpm
1420
e3
0b
i5
89
.1
1
Blind Panel Control Panel 2.8
Illustration 13: Control Panel Options
For more information on control panels, refer to the application guides.
The LED labeled ST shows the module status.
The LED labeled X1 shows the network status on Ethernet port X1.
The LED labeled X2 shows the network status on Ethernet port X2.
Table 19: Fieldbus Indicator LED Functions
LED label Status LED pattern Description
ST DCP blink Flashing yellow PROFINET discovery protocol active, 3 s flashing.
Not configured Off PROFINET not configured.
IO connection faulted Steady red A PROFINET IO connection has faulted.
Configuration mismatch Flashing red PROFINET configuration mismatch.
Configured/No IO connection Flashing green Device is configured from PLC master but no IO connection
has been established.
All IO connections OK Solid green PROFINET IO connection to device established.
X1/X2 DCP blink Flashing yellow PROFINET discovery protocol active, 3 s flashing.
Link down Off –
Invalid configuration/Duplicated
IP address Solid red IP configuration error
Link up Solid green Ethernet link is active.
AQ408626183394en-000101 / 136R0280 30 | Danfoss A/S © 2023.06
Troubleshooting
iC7 Series PROFINET
Operating Guide