- -
HLP-C
+
Inverters
⑵ Function Description of Circuit Terminals
1. Main Circuit Terminals Arrangement
2. Control Circuit Terminals Arrangement
FA FB FC DRV FOR REV RST SPL SPM SPH GND AM
VI AI +10V
3. Function description of main circuit terminals
4
、
Function description of control circuit terminals
Symbol Function Description
R.S.T
Input terminals of AC line power.(230V class, for
both single/three phase, single phase connected to
any two phases)
U.V.W Output terminals to motor.
P.P.r
External braking resistor terminals.
E
Ground terminals: the third kind of grounding for
230V and special grounding for 400 V of Electrical
Engineering Regulations.
Symbol Function Description
Factory setting
FOR Multi-function input 1 Forward run
REV Multi-function input 2 Reverse run
RST Multi-function input 3 Reset
SPH Multi-function input 4 High speed
SPM Multi-function input 5 Intermediate Speed
SPL Multi-function input 6 Low Speed
GND Common end for digit
control signals
