Danfoss FT1555-BM bench mount capping machine Operator’s Manual
AQ445452814730en-000101
© Danfoss FT1555-BM bench mount capping machine Operator’s Manual | 2023.03. | 5
Installation / environment
Step 1:
Position the machine in a clean, dry, level surface in a well
ventilated area free of combustible material. Keep a clear perimeter
of 12” on both sides and 6” at rear of machine. Do not place
anything on top of machine.
Step 2:
Connect to an appropriate power source using a NEMA L6-15,
2-pole, 3-wire grounding, 15 Amp 230V locking plug and outlet.
(See Figure 2)
Machine operation
Step 3:
Set the Power On/Off switch and Heater Timer On/Off to the Off
position before connecting the machine to the power source.
(See Figure 3)
Figure 2
Figure 3