Danfoss
FT1244 Crimp Machine Operator’s Manual
8 | © Danfoss FT1244 Crimp Machine Operator’s Manual | 2023.05.
AQ439269330776en-000101
PROCEDURE FOR CRIMPING -32 HOSE ASSEMBLIES
Crimping -32 fittings requires special procedure to properly attach the fitting. The fitting used for this application is of one piece
construction (the socket is precrimped to the nipple to establish the required crimp length). Refer to the PowerSource Crimp Spec Tool at
danfoss.com/crimp for crimp spec details which outlines the required crimping information. Scribe a mark on the socket at the nipple end
at the desired dimension as indicated in the PowerSource Crimp Spec Tool at danfoss.com/crimp for crimp spec details. Locate the fitting
within the crimp die area (See illustration 3). Crimp the fitting as previously described.
HOSE
1509-32
.41
1529-32
.41
1546-32
.41
2661-32
.40
2665-32
.41
2681-32
.41
2766-32
.41
2777-32
.41
2781-32
.41
2791-.32
.35
FC194-32
.41
FC241-32
.41
FC299-32
.41
Illustration 3
