Danfoss
FT1244 Crimp Machine Operator’s Manual
2 | © Danfoss FT1244 Crimp Machine Operator’s Manual | 2023.05.
AQ439269330776en-000101
Table of Contents
Introduction ........................................................................................................................................ 3
Safety Instructions ............................................................................................................................. 3
Specifications ...................................................................................................................................... 3
Preoperation Procedures .................................................................................................................. 4
Installation ........................................................................................................................................... 4
Tooling .................................................................................................................................................. 4
Operating Instructions ................................................................................................................... 5-9
Maintenance ........................................................................................................................................ 9
Machine Breakdown ................................................................................................................... 10-11
Hydraulic Breakdown .................................................................................................................. 12-13
Electrical Schematic .................................................................................................................... 14-15
The calibration method for some early model crimp machines used fittings that are no longer supplied by Danfoss
Corporation.
Therefore, some of the data on the following pages may be considered obsolete, such as machine settings (i.e. 1401
socket data).
Calibration can still be performed using current (global) fittings. Please contact Danfoss for specific information.
Obsolate Data Notice
