Danfoss ET9600, Руководство оператора

Страница: 33 / 56

2. Place the work piece onto the cutting insert between the bending
pin (3) and hose feed (6).
3. Switch on the machine using the main switch (5).
4. Move the lever (1) downwards steadily and slowly.
This pushes the hose feed (6) and in turn the work piece to-
wards the cutting knife (4). The cutting process is completed.
5. Move the lever (1) upwards into the starting position.
6. Switch off the machine using the main switch (5).
7. Remove the work piece.
5.4 Stop
1. Complete the cutting process.
2. Deposit the work piece outside the machine.
3. Deactivate the main switch (1).
4. Check the machine for glowing embers.
5. Check the machine for contamination and outside damage.
6. Check the cutting knife for damage and cracks.
7. Remove contamination, dust and chips using a vacuum.
Inform the fitter in case of damage or other irregularities.
5.5 Overload protection
The motor is protected against overload by a motor protection switch.