![background image](http://html1.mh-extra.com/html/danfoss/et9600/et9600_operators-manual_3404317028.webp)
Test run without work piece
1.
Switch on the machine using the main switch (3).
2.
Move the lever (1) downwards steadily and slowly.
3.
Move the lever (1) upwards into the starting position.
Test run with work piece
1.
Position the bending pin (2) according to the work piece diame-
ter (see “Cutting the work piece” in Section 5).
2.
Place the work piece onto the cutting insert (4) between the
bending pin (2) and hose feed (6).
3.
Switch on the machine using the main switch (3).
4.
Move the lever (1) downwards steadily and slowly.
5.
Move the lever (1) upwards into the starting position.
6.
Wait for around one minute until the cutting knife (5) has cooled.
7.
Repeat the cutting process nine times when cutting a work piece
with cutting knife TM or TMG.
Содержание ET9600
