Danfoss ET9600, Руководство оператора

Страница: 43 / 56

7 Troubleshooting
Error Cause Remedy
Machine does not cut Main switch is off Switch on the main switch.
Power plug defective Check the power plug,
replace if necessary.
Motor defective Contact service.
Main switch defective Contact service.
Cutting knife worn Check cutting knife for wear,
replace if necessary.
Knife not centred Flange disc is not positioned
correctly on the feather key Turn flange disc and insert it
into the feather key.
Work piece is jammed in knife
protection Switch off the machine using
the main switch and secure it
against unintentional restart.
Move the lever into the starting
position. Remove the work
piece. Wear cut-proof gloves.