4.3.2 Setting the internal skiving diameter
1. Hold the skiving spindle.
2. Remove the screw (7) in the tip of the skiving spindle.
3. Assemble the centering sleeve (6) that is specified for this diam-
eter.
4. Screw in the loosened screw (7)
– do not tighten it.
5. Adjust the internal skiving diameter by turning the setting screw
(5).
6. Fasten the screw (7) in the tip of the skiving spindle.
7. Check the skiving diameter, adjust if necessary.
4.3.3 Inserting the external skiving tool
1. Select the correct external skiving tool (if several available) for
the hose diameter.
2. Pull the stop lever (4) on the knife holder (1) upwards and hold it.
Assemble the right corresponding centering sleeve (6), depending
on the nominal diameter of the hose assembly.
Содержание ET6110
