Danfoss ET6110, Руководство оператора

Страница: 24 / 56

4.3 Commissioning
The machine is commissioned by the customer's fitter.
1. Place the machine on a stable and level workbench.
2. Bolt the machine legs onto the workbench.
The workbench must be sufficiently solid and stable.
Place the machine in a way so that it is easily accessible for
maintenance work from all sides.
3. Check the machine for damage.
4. Check the electric cables for damage.
5. Train the
operating staff and record training sessions in “Decla-
ration of trained staff”, Section 9.
WARNING!
Risk of injuries!
Machine components might loosen during transport. Such com-
ponents might be flung out during the skiving process. There is a
risk of being injured.
• Simulate the skiving process several times without a work
piece.
• Check the machine for atypical noise.
WARNING!
Risk of injuries!
Pay attention to the cutting edges at all operations on the knives.
• Wear safety gloves.