Low voltage connector
1
Low voltage connector
Low voltage connection box (+LVB1 -option)
Low voltage connector details
The electric machine has a low voltage (measurement signal) connector which is used to read out inbuilt
temperature and rotation sensor (resolver) data from the electric machine. Optionally the connector is
replaced with a connection box (LVB1). The temperature data comes from PT100 sensors located
in the stator windings. Check from the rating plate which pin configuration is valid. Find the
configuration for temperature and resolver measurements option in rating plate type field. The electric
machine has three PT100 sensors in windings as a standard option.
The measurement connector has these components:
•
12 pin TE HDSCS for temperature surveillance
•
Connector type: TE 115645201
•
Pin type of connector: TE 9642703 (gold plated)
•
Mating female connector type: TE 117036391
•
Pin type for the mating connector: TE 12413813 (use gold plated pins)
User Guide
EM-PMI300-T310
Installation
©
Danfoss | April 2023
BC265858156812en-000202 | 41