INT
21
Install the display module carefully!
•
Do NOT over-tighten the mounting screws on the display
•
module.
4.5 Activating the thermostat
Switch on the mains supply.
•
The unit switches on automatically.
•
If the unit has never been activated before, configure basic
•
settings as described in section 4.6.
4.6 Configuring basic settings
You can access and configure basic settings at any time by
•
pressing and holding the button for 12 seconds, entering
code 0044 and changing the parameters as required.
If the button is not operated for approximately 60 seconds,
•
the thermostat automatically exits without storing any
changed values.
Turn clockwise to select “0044”.
Press to confirm.
Installation manual